הוא גדול מהמידע

Voltage:

220V ( 110V-120V voltage, we will be equipped with a voltage converter)

Power：10W/120W, For Flue Diameter 13-20cm:

Note:

1. Domestic chimney adopts induced draft fan, and the outlet temperature should not exceed 60 degrees. Otherwise, the induced draft fan will be damaged. Install the power cord at least 0.5 square copper wire:

2. When installing or removing, please turn off the power switch to avoid electric shock.:

3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.:

4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to get the best effect.:

5. When the induced draft fan stops working, attention should be paid to the backflow of smoke causing smoke to emerge.:

6. The smoke evacuator is placed on the chimney. The smoke exhauster must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the chimney cannot burn the insulation layer of the power cord.:

Package Included:

1 *Induced draft fan :